Keysight E36313A 160W Triple Output Power Supply

The Keysight E36313A offers three outputs with the power of 160 W with line/load regulation of 0.01%. Front-panel buttons allow you to turn any output on or off and you can configure each output with 2-wire local sensing or 4-wire remote sensing. The 4-wire sensing removes losses caused by IR drops in your power-delivery wires. All outputs have over-voltage, over-current, and over-temperature protection. You can programmatically change the sense configuration from 2-wire to 4-wire through an internal relay, eliminating the need for shorting bars or jumpers often used on most power supplies. The front-panel binding posts let you connect banana plugs, bare wires or spade lugs. Each set of binding posts is color-coded to match the display and control buttons. A 4.3-inch color display lets you see measured output voltage and current, voltage/current settings, and 2/4-wire sense configuration. Soft keys under the display let you set output parameters, configure a digital output for triggering or enabling alarms, and configuring the internal data logger. With the data logger, you can view output voltage and current in an oscilloscope-like display, then save screen images (PNG or BMP formats), and save data (up to 7 Mbytes) in CSV format. A battery backup prevents the instrument from losing data should you have to move it before retrieval. In addition to the data logger, the E36313A can store output lists. These allow you to set up a power sequence for those applications and tests that require bringing up power rails individually. You can program the voltage, current, and the duration of each setting. The list can also be triggered based on internal or external events and you can repeat the list to get longer sequences. Connectivity includes a rear-panel USB port and a LAN/LXI port. All units are programmable using familiar SCPI commands or through Interchangeable Virtual Instrument (IVI) drivers.